Home-&-Garden-Articles


6
Aug 10

Garden Sheds – More Than a Storage Area

You may already have a garage or a shed in your garden or backyard and its possible that you haven’t even considered the prospect of adding a garden shed at all. Any garden implements could easily be stored in the garage or utility area. However, a garden shed is so much more than just an every day storage area, as it can have a character all of its own. It can serve many purposes other than practical ones.

A garden shed can be used as a place to plan and plot your garden’s development or just as a place of sanctuary and contemplation. A garden shed can also be used to add depth and character to a garden or even as the focal point with the garden designed to complement the shed. For the uninitiated a garden shed is just another shed. However, there are many different styles, which can add their own individual charm and character to your garden.

The first thing you have to do before adding a shed is to obviously decide its location. The location of the shed will help determine the size and style of the shed. You need to consider many different things such as ease of access, how the shed will look in the chosen area, security, practicality and so on. When the location has been decided and the size of the shed determined then the next thing to so is lay the base. You can use a layer of gravel or build a concrete base. Whatever the base though, it should be level. Do not contemplate adding a shed straight onto the grass. While this may seem obvious people will do it ! It is important that the wooden shed should not be contact with the ground to avoid the wood rotting. Another alternative is to lay the shed on timbers.

The type of shed is the important decision. The choices are simple metal, plastic or wooden sheds. Whatever the structure in your garden these are the three basic materials used and the characteristics remain the same for each. Wood provides the classical look, plastic is cheaper and metal is stronger. At the end of day, if the shed is in general view then wood is the preferred solution. An ugly looking plastic or metal shed can ruin he look of a garden.

Another important decision is whether to build the shed yourself or get a professional to do it. Although shed kits usually give you a substantial discount, they require much more time and energy. Some kits even require you to cut the timber to size before you can start building. Having said that the decision is relatively easy if your honest with yourself about your DIY capabilities.

Once, the shed is in place you need to give the wood some protection. While the materials will come with a gaurantee, you should still regularly add a protective coating. If you are putting together a kit, a good tip is to paint as much of the shed as possible before assembly, since it is much easier to paint some parts of the shed before assembly, rather than standing on a ladder to do it.

Unless you are getting a particularly large or unusual shed, it is unlikely you will need planning permission, but always check. You don’t want to be moving a full sized shed several feet, so you want to be sure you have it in the right place to begin with.

The typical garden sheds are either apex sheds or pent sheds. These come in many sizes starting from 2 x 1 metres or 5 x 3 feet upwards. A good idea also is to use the sloping roofs to capture water, which is essential through long hot dry periods.

About the Author

Matthew Anthony contributes to several garden building based sites such as conservatories and greenhouses.


8
Jul 10

Choosing Conservatory Furniture

Conservatories are such lovely and serene rooms that homeowners want to spend a lot of time in them. However, you cannot enjoy your conservatory very easily without choosing conservatory furniture. Whether you want to sit and sip a cup of tea or just want to curl up with a good book, you can find functional and attractive furniture for your conservatory.

When you choose conservatory furniture, you will need to look for a few important features. First, since most conservatories have higher humidity than other rooms in the home, you should look for furniture that is weather resistant or made specifically for conservatories. Next, look for comfortable pieces. You want to be able to relax and enjoy your room. Finally, look for pieces that have classic styling. You do not want to have to constantly replace your furniture because of fad changes.

Rattan furniture is the traditional choice for conservatories for good reason. This beautiful but functional furniture can easily handle the humidity of the room, as well as damage from the sun’s rays, for many years. Although it is usually found in natural, green, or black colors, you can find rattan furniture in other colors, including white and tan, as well. Chairs, sofas, coffee tables, and stools are all readily available in rattan.

Rattan furniture is usually bigger and sturdier than wicker pieces. However, if you want to give your conservatory a more delicate and airy look, you may still want to take a look at wicker furniture. For people who prefer the look of wicker but are concerned that it won’t hold up long enough, resin furniture is available. This furniture can be made to look exactly like wicker, but it is much more durable.

Iron or metal patio furniture is stylish and functional enough to move from the garden to the conservatory. With it’s sleek style and neutral colors, metal furniture is ideal for anyone looking to create a room with a modern feel. For added comfort, you may want to add cushions to your chairs or sun lounger. Since waterproof cushions are available in a wide selection of designer fabrics, you can find the perfect cushions for your conservatory.

Also, consider adding a dining area to your conservatory. Teak tables and chairs are extremely long lasting and durable without sacrificing style. If you prefer iron, Rattan, or wicker pieces, look for pieces with glass, mosaic, or marble tops to add additional style.

Finally, no matter which pieces you choose for your conservatory, be sure you take the time to use them. After all, there is no sense in letting that beautiful room go to waste.

About the Author

Matthew Anthony has contributed to many home and garden sites such as conservatories and garden furniture.


31
May 10

Aluminium Conservatories

The conservatory is a popular addition to homes around the world and in particular in colder climates. Conservatories began their existence in the 1700s as Dutch farmers looked to find ways of protecting their plants during the colder winter months. These early greenhouse structures evolved not only into the common garden greenhouse but also the conservatories we see today. The original concept in all probability did not have in mind the idea of creating a transitional space between the dwelling and the out of doors. Of course the initial idea behind those who created the first versions of conservatories was to provide a means to prolong the life of plants during the chill of the northern European winter months.

Today the equivalent commercial greenhouses are typically made of aluminium, whilst the manufacture of aluminium has been slow to progress. However, in recent years as technology has progressed, aluminium conservatories have become a serious rival to the PVCu conservatories so popular since the 1970s. The New Generation Aluminium conservatory has a strong slim frame which lends itself perfectly to the sleek lines and rectangular design of Edwardian conservatories.

The modern aluminium can compete against the major strengths of its PVCu rival and indeed the finishes are so advanced these days the timber conservatories are also threatened. A major consideration is security and this is one area that aluminium comes out on top over PVCu. Aluminium frames do not need the large expansion gaps that PVCu frames have and which can be a weak point vulnerable to a would be intruder.

In the main, aluminium conservatories are versatile, strong and durable as an extension to the home. The increasing popularity has meant that in recent years it is much easier to find a capable supplier and builder that can readily construct a versatile and durable aluminium conservatory. By working with the most reliable people in the task of designing and building an aluminium conservatory, it is possible to create a spectacular addition to the home that will solidly stand the test of time. Although it could be argued that a conservatories looks it best when made of timber, there can be no doubt that the aluminium version is preferable to the PVCu conservatories that became so popular towards the end of the twentieth century.

About the Author

Garry John has contributed to several home improvement sites including conservatories and blinds.


4
Apr 10

Choosing Conservatory Blinds

The cost of furnishing a conservatory can catch many people out, in fact it can often cost more than the conservatory itself. Conservatory Blinds can be very expensive so it is important to know what the choices are and what value a particular blind will bring. This article looks at the most common types and discusses the individual merits of each one.

Pleated Blinds

Pleated blinds are argueably the most attractive conservatory blind. They are available in a huge range of frabics and colours and have a modern elaborate look. They are a value alternative to pinoleum blinds and can be made with reflective material, which will help to maintain a more pleasing temperature. Typically, the pleats come in 25mm width but are increasingly available in 20mm. Pleated blinds are very versatile and can be used in any style of conservatory. Made to measure pleated blinds are readily available.

Pinoleum Blinds

Pinoleum blinds are the most traditional type of conservatory blind. Pinoleum is the name given to strips of thin wood which are woven together in different patterns. Roman or Rolled-up Pinoleum blinds are available. One of the great advantages of pinoleum blinds is that they let in a diffused light between the strips of wood. This gives them a great look. However, the downside is that maintaining the temperature is harder as heat comes in as well as light. This is obviously a problem is controlling temperature is the major concern, in which case this type of blind is probably not the right choice. Having said that it is possible to fix a reflective material to the back of the blind, but then the pleasant light effect is lost which is one of the major attribute of pinoleum blinds.

Roller Blinds

As previously discussed, conservatories are often tarnished by the high and low temperatures and the glare of bright sunlight. Also, bright light can damage furniture and ruin your favourite plants. However, you do not want to block out all light completely otherwise what would the point of a conservatory be. Roller blinds are a very versatile solution, while not as attractive as pinoleum or pleated blinds, they do offer a very practical solution. Also, they are great value and are usually at the lower end of the budget range. Roller blinds come in either standard sizes or made to measure. Or you can even adjust them yourself. Another advantage is that as they are typically made from synthetic material, roller blinds can be easily cleaned. Also, you can get reflective material to help keep the conservatory cool in winter and the heat out in the summer. Roller blinds are the easiest type of blind to fit yourself. The blind sits between two brackets that are fixed to the inside or outside of the window recess.

Hopefully this brief discussion will provide some assistant in choosing your blinds. As a general rule it is always a good idea to learn from other people’s experience and so tap into friends and family who have already gone through this process. In addition talk to some experts and get some no obligation quotes, but make sure you know what is being quoted for.

About the Author

Garry John has contributed to several sites about conservatories including conservatory blinds and conservatories


16
Feb 10

SLIDING GLASS DOOR REPLACEMENT

This article is going to be about replacing an old sliding glass door with a modern Vinyl frame sliding glass door. If you currently have french doors and you want to replace them with sliding doors, or vise versa, future articles will cover that topic.

The first thing we have to do is measure for the replacement door. You want to measure across the bottom, center, and top of the existing door frame to find the narrowest dimension. Start outside and measure at the point where the old door frame stops and the exterior material starts. That material can be stucco, siding, or brick. Measure across in the 3 places: bottom, center, and top. Record the smallest dimension. Then go inside and do the same thing. You want to measure where the frame ends and the drywall, plaster, or sheetrock begins. Take all six measurements, find the narrowest one, and deduct 3/4″. That is the width of the new door. Now, when you measure the height, you can do it just on the outside. Measure the left, center, and right side from the ground where the bottom track sits, up to the top where the old frame ends and the exterior material begins. Take the narrowest dimension and deduct 1/2″. That is your height of the new door. Then, determine which side the sliding panel should be on. The fixed panel is designated by the letter “O”, and the slider is an “X”. In most areas of the country, you call it out by looking at the door from outside and reading left to right. So, if you were outside looking at your door, and you want the sliding panel to close to the right wall, you would ask for an “OX”. However, because i have recently discovered that not all parts of the country do it this way, my suggestion is to ask the dealer how they read the opening before placing your order.

Next, you have to decide whether you want a retrofit frame or a replacement frame. If the old frame is flush with the exterior material, such as in the case of stucco, then you want to get the retrofit frame, which comes with the outside fin. That will eliminate the need to trim the outside. If you have brick or siding surrounding the opening, then you need to get a replacement frame and trim the outside yourself. You can use wood, vinyl, or other composite materials available in most major hardware store chains. You also need to measure the depth of the old frame. The majority of vinyl replacement doors have a frame depth of 4 3/4″. Most door openings, when framed, have a depth of 5 1/2″ to the innermost surface of the wall, whether it’s drywall, plaster, or whatever else. Therefore, when you install the new door, you will need to add some sort of trim product to build the inside of the door frame so it is flush with the wall surface. We sell vinyl extrusions specifically for this purpose. It’s a two piece system that allows you to bring the frame flush with the wall, then apply the molding to the wall and door frame to finish it. Pictures and descriptions of the products are available by going to http://www.how-to-install-windows.com and clicking on “shop”.

You want to be sure and order all of the materials you will need to do the job at the same time that you order the replacement door. That way, when the new door comes in 2 to 4 weeks later, you will have everything ready to do the job. In addition to any trim needed, you are also going to need caulk, a roll of R-13 Insulation, liquid nails for the track, 4″ deck screws, shims, dust masks, and safety glasses. Once the new door arrives, it will be time to take out the old door. That will be our topic in next week’s article.

John Rocco has been installing
replacement windows since 1978.
To learn more, visit How To Install Windows

About the Author

John Rocco has been installing
replacement windows since 1978.
To learn more, visit How To Install Windows


10
Jan 10

How To Replace The Rollers On Your Patio Door

Have you noticed your patio door is getting harder and harder to open ? Maybe it’s time to change the rollers on the door. They generally last from ten to fifteen years but they do wear out and its a job that a do-it-yourselfer can accomplish with a little advice and some strong arms to get the door out !

Sliding patio doors are usually aluminum but there are many wooden and vinyl models on the market. All of them use ball bearing rollers to slide easily back and forth. The aluminum and some vinyl doors have a door bottom that is held in place by 2 screws on either side of the door near the bottom. Beneath the screw is usually an open hole in which there is an adjusting screw to raise the roller up and down. The wooden doors often have pairs of rollers due to their extra weight. The adjusting screws are accesible through plastic caps covering holes in the front of the door bottom.

I mention the adjusting screws because you need to check them before deciding to pull the door out and replace the rollers. Slide a big flat blade screwdriver underneath the door on one side and lift slightly to remove the weight from the roller. Use another screwdriver to turn the adjustment screw. See if that makes the door slide better.

Sometimes thats all thats necessary but if the adjusting screws wont turn or are totally missing, you will have to lift the door out of its track and remove the large screws holding the door bottom on and pull the door bottom off. Get help to lift the door out. Two people are needed to safely handle even the smaller patio doors. The door bottom may not pull off easily especially if the door is old. Check for any metal tabs that may be holding it on and gently work the bottom off.

Some old aluminum and vinyl patio doors have rollers that use one screw both to mount the roller and to adjust it. These types of rollers can often be changed without removing the bottom of the door. Look carefully at the bottom of the door in case there is room to pull the roller assembly out.

Wooden patio door rollers are somewhat easier to change, although the door itself is much heavier. The rollers are often screwed in to the wood door bottom. Remove the screws, and out come the roller.

Some Vinyl patio doors are glued together. They were never intended to come apart. You may not be able to remove the rollers if you see no visible screws holding the frame together. Also vinyl doors are often brittle with age and crack easily as you try to pry off the door bottom. Take extra care if you have a vinyl patio door.

Once you have the bottom off the patio door it should be easy to see how the rollers are held in. Usually, removing one screw or bending a metal tab is all thats necessary. Remove the rollers and take them with you to your local glass shop to get the proper replacements.

To reassemble everything start by adjusting the new rollers so they are up as high as they can go. You dont want them getting in the way when you reinstall the door on its track. Make sure you cover the roller retaining screws with cork or rubber if they come near the bare glass in the door bottom. If the metal screws touch the glass, it will crack.

Replace the door bottom, reinstall the screws that secure it and lift the door back in to place. Follow the instructions gave earlier for adjusting the rollers. You should now be able to see the door move up and down when you turn the adjusting screws. You will also be able to align the door with the frame using the screws. Your patio door lock may need to be adjusted to compensate for the new door height.

Try the door and you should be amazed at how easy it is to close. It should only require a couple of pounds of force to open and close. No more fighting with a heavy door and you did it all yourself !

About The Author

Adrian Dunevein runs a self help website for people who want to do their own window and door screen repair. The website is a complete resource for anyone needing to repair or replace any type of screen.

adrian@all-about-screen-doors.com


6
Jan 10

Comparing Types Of Conservatory Blinds

The cost of furnishing a conservatory can catch many people out, in fact it can often cost more than the conservatory itself. Conservatory Blinds can be very expensive so it is important to know what the choices are and what value a particular blind will bring. This article looks at the most common types and discusses the individual merits of each one.

Pleated Blinds

Pleated blinds are argueably the most attractive conservatory blind. They are available in a huge range of frabics and colours and have a modern elaborate look. They are a value alternative to pinoleum blinds and can be made with reflective material, which will help to maintain a more pleasing temperature. Typically, the pleats come in 25mm width but are increasingly available in 20mm. Pleated blinds are very versatile and can be used in any style of conservatory. Made to measure pleated blinds are readily available.

Pinoleum Blinds

Pinoleum blinds are the most traditional type of conservatory blind. Pinoleum is the name given to strips of thin wood which are woven together in different patterns. Roman or Rolled-up Pinoleum blinds are available. One of the great advantages of pinoleum blinds is that they let in a diffused light between the strips of wood. This gives them a great look. However, the downside is that maintaining the temperature is harder as heat comes in as well as light. This is obviously a problem is controlling temperature is the major concern, in which case this type of blind is probably not the right choice. Having said that it is possible to fix a reflective material to the back of the blind, but then the pleasant light effect is lost which is one of the major attribute of pinoleum blinds.

Roller Blinds

As previously discussed, conservatories are often tarnished by the high and low temperatures and the glare of bright sunlight. Also, bright light can damage furniture and ruin your favourite plants. However, you do not want to block out all light completely otherwise what would the point of a conservatory be. Roller blinds are a very versatile solution, while not as attractive as pinoleum or pleated blinds, they do offer a very practical solution. Also, they are great value and are usually at the lower end of the budget range. Roller blinds come in either standard sizes or made to measure. Or you can even adjust them yourself. Another advantage is that as they are typically made from synthetic material, roller blinds can be easily cleaned. Also, you can get reflective material to help keep the conservatory cool in winter and the heat out in the summer. Roller blinds are the easiest type of blind to fit yourself. The blind sits between two brackets that are fixed to the inside or outside of the window recess.

Hopefully this brief discussion will provide some assistant in choosing your blinds. As a general rule it is always a good idea to learn from other people’s experience and so tap into friends and family who have already gone through this process. In addition talk to some experts and get some no obligation quotes, but make sure you know what is being quoted for.

About The Author

Garry John is a regular contributor to uk home improvement websites such as http://www.uk-conservatories-online.co.uk and http://www.uk-conservatory-blinds.co.uk.


5
Nov 09

Selecting Replacement Windows

Windows are the eyes of a home. From inside, you see the outside world through them. It has been said that the eyes are the windows to the soul. For a home, you can gain a sense of its character by examining its windows.

Windows are the primary source of natural light for a room, but they are so much more. They give a home beauty and personality. The decision to replace them is an important one. Replacements can affect the feel of the home for inhabitants and provide the opportunity for significant energy savings. They can dramatically change the value of the property when it comes time to sell the home.

Types of replacement windows

There are many types of replacement windows to fit the varied styles of home architecture. Some of the more popular styles include the following.

  1. Casements have one or two panes. They are hinged on one side and open by rotating a crank. Casement windows generally open only 15 – 30 degrees, enough to let in light, but little else.
  2. Sliders are generally two offset sashes, one which will slide behind the other, much like a sliding glass door.
  3. Double hung have two sashes which move vertically, allowing ventilation through a space at the top and/or at the bottom.
  4. Bay windows are three-sided arrangements that project from the exterior wall of the house, usually in living rooms or formal sitting rooms. They give the room a larger feel while offering additional space for a seat or arrangements of potted plants.
  5. Bow windows are set in a series with each sash set at an angle. Bows are similar to bays in that they protrude from the exterior face of the house. They are different in that each sash or in the series is set at a slight angle so that the entire series forms a graceful curve or bow, rather than the sharp three-sided appearance of bay windows. There can be any number of sashes in the bow window series.
  6. Garden windows are frequently installed in kitchens, often replacing the sash behind the kitchen sink. These also extend beyond the exterior wall of the house. They are much smaller than bay or bow styles and are often used for holding potted plants, creating an interior garden, while giving an improved view of the outside lawn or garden.
  7. Skylights are installed into the roof of the house to provide direct lighting. These are generally not designed to be opened in order to provide the best weather seal.

 

Replacement materials

Not so long ago, windows were simple panes of glass glazed into a sash. Efforts to become more energy efficient have turned them into highly engineered systems.

Single pane models have little insulating value and are still used in warmer climates.

Double pane or double glazed styles are built with an air space between the two panes of glass. This glass-air-glass sandwich permits much less energy radiation through the glass. Better insulating value is offered by designs with clear argon gas in place of air. Yet another system combines the double glazed models with panes of glass coated with a low emissivity (low-e) film. This coating reduces energy transfer even further.

Frames for sashes may be constructed from wood, wood clad in aluminium or vinyl, vinyl or fibreglass. Wood is an excellent choice in that it can be cut or trimmed to provide an excellent fit. Wood clad with aluminium or vinyl is an excellent choice in regions with periods of high humidity or damp weather. Vinyl is a great choice for homes in high moisture regions such as on lakes or the seashore. Wood clad and vinyl replacement windows are also low maintenance after the installation.

There are also several options in the glass you will want to consider for your replacement project. You can choose clear or tinted glass. You may even choose leaded and bevelled edge glass or tempered safety glass. In addition to the types of glass, there are a number of films that can be applied to the glass to restrict light and energy radiation as well as to provide greater privacy.

Double pane sashes have the added advantage of cutting down the amount of sound coming from outside the home. This helps reduce traffic noise in high traffic areas.

 

Planning your replacement installation

When you begin planning your replacement project, spend some time brainstorming the options and the specific benefits you are seeking. How do you want to control light? Ventilation? Is security an issue? How about privacy? Do you want to make the room seem larger?

You will also want to coordinate your windows with the other architectural features of the house. This is called curb appeal. You can dramatically change the appearance of the house as well as its value with the replacement styles you choose.

Finally, be sure to check city building codes to maintain compliance.

Installing replacements or even new installation projects not difficult tasks for a diy. There are numerous books and websites offering step-by-step instructions for just about every window application you can imagine.

 

Tips on selecting replacement styles

Here are some commonsensical tips to help you select your replacement windows.

  1. Choose high quality products with a reliable warranty. Your new windows can be expected to last 40 or more years.
  2. Choose models with low-e glass.
  3. In cooler climates, choose either double glazed styles or gas-filled double glazed models for greater energy efficiency.
  4. Check the magazine and website reviews about the various kinds of windows. The top brand names come at a price. You may find excellent engineering and craftsmanship in lesser-known brands that will provide you with excellent service for much less money.

The beauty and comfort of your home can be tremendously affected by the replacement windows you choose. Offers to sell discount products by door-to-door or telemarketing salespeople should be considered extremely carefully. Most of these offers end up with the installation of inferior quality replacements at inflated prices. The cost and effect of replacement windows is too great to take unnecessary chances. Take time to consider your needs for lighting, room access, ventilation and appearance. Consult a professional if necessary. The time and effort will be well worth it in selecting the appropriate replacements for your home.

About the Author

Bobby Carlten is author and designer of http://www.replacement-windows-tips.com. The publisher is also publishing on issues like hurricane protection and window clips.


16
Jun 09

(New construction windows or replacement windows? Which is r

(New construction windows or replacement windows? Which is right for you?)

Hello, my name is John Rocco.I grew up around the window and door business. My father owned a glass shop
that dealt in every aspect of residential and commercial glass.Naturally, when it came time to choose a profession, i wound up in the
window and door business. I have been in the business for about 27 years, and i have been self employed for 20.One of the things
that seperated my company from my competitors was my willingness to show my customers how to replace their windows themselves.
Whenever i would encounter a customer with a curiosity or willingness to learn how to install their own windows,i would offer to sell
them the labor on one window,using them as my helper.Then,they would install the rest of the windows using the knowledge gained
from helping me install one.Most window companies would never do this because there is so much money made on the labor.But i
was always so busy,i never felt like it was costing me money.Eventually, i made an installation video for those homeowners who
wanted to do their own windows.While the video is for sale on my website, i decided to take excerpts from the video and write an article
once a week covering some part of the window replacement project.This article is going to cover the difference between window
frames used in new construction homes, and the window frames that are used to replace existing aluminum or wood windows.

When a new home is being built,the windows are nailed to the wood studs that make up the house frame.In order
to accomplish this, new construction windows have a fin around all four sides of the frame that rests against the outside of the stud,
and nails are driven into the studs through the nailing fin. After that,flashing paper is applied to prevent water leaks, then the exterior,
material is applied. That material can be stucco, brick, siding, etc.Now, imagine 10 or 20 years later when you want to replace those
windows. If you were going to install your replacement windows the same way the original windows were installed, you would have to
remove the exterior material around each window in order to get to those nails holding the frame in there. You can see how this pro-
ceedure could cause many problems, not to mention all the labor involved. I have seen homes in california with stucco exteriors where
the homeowner had the stucco cut out in order to remove the old windows.The problem was they were unable to match the stucco colors
after patching. Its just not a very efficient way to replace windows. So the replacement frame was designed. In most parts of the country
it’s simply a new construction window frame with the nail fin removed. In the west,where stucco is a common home exterior,a retrofit
frame was designed. If you’re going to be replacing the exterior material on your home, then you might want to consider going with the
new construction window since the nailing fins will be exposed anyway. Also, chances are that a contractor will be doing your exterior
replacement,and it would be wise to let the contractor install the windows as well.Since my installation videos deal with window replace-
ment only, these articles will focus on replacement frames and retrofit frames. Using these two frame styles,a do it yourselfer can
replace their old windows without any damage to existing interior and exterior surfaces.And the job can be done using common tools
such as a drill,tape measure, and caulking gun. In next weeks article,we will discuss the replacement of wood sash windows.

John Rocco has been installing
replacement windows since 1978
To learn more, visit How To Install Windows

About the Author

I have been replacing residential windows since 1978. I now sell vinyl windows and doors as well as instructional videos through my website:http://www.how-to-install-windows.com


10
Feb 09

CHOOSING A VINYL REPLACEMENT WINDOW CONTRACTOR

Whenever i write an article, it’s usually tailored to the do it yourself homeowner to help them save some money on the high cost of labor these days. This article is for the “not so handy” homeowner who wants to have new vinyl windows installed in their home. So, where do you begin? Well, the first step is to get estimates. You should always get 3 estimates. Keep in mind that the price you are quoted doesn’t necessarily reflect the quality of the product. For example, I used to wear the hat of Owner, Salesman, and Installer. So, when I would give an estimate, my only markup would be to pay my salary. On the other extreme, some companies have an inside sales staff who do telemarketing as well as mail solicitation. These people set up in-home estimates. Then, there is an outside sales staff who visit the customer for an in-home estimate. If the customer signs a contract, there is another employee who measures your windows. Then, the installation crew comes out and actually installs your windows. In many cases, you never even see or talk to the owner. Now, imagine if this company, let’s call them shears, was selling the exact same window that I was selling. After you got both estimates, you might be inclined to think that my product must be inferior if I’m able to sell it so much cheaper. The reality is, it’s cheaper because I pay two salaries; my salary and my other installer’s salary. The other owner has to pay his own salary plus Inside sales, outside sales, field measurer, and installation crew.
So, as you get each estimate, here are the important things to know about that particular brand: What kind of warranty do they offer? Any reputable vinyl window manufacturer should offer a lifetime warranty because any quality vinyl window and door really is made to last a lifetime. Ask how long the MANUFACTURER has been making vinyl windows. A lifetime warranty is meaningless if the manufacturer goes out of business. Once you’re confident that the manufacturer is well established, find out how long the installer has been replacing windows. Make sure they are licensed and insured. Being licensed and insured doesn’t necessarily mean they’re good, but it does give them accountability. I knew an unlicensed window installer who was as good as any licensed installer, but if he were to mess up a job, the customer had no recourse against him.
Once you are satisfied with the price, manufacturer, and installer, you can determine the level of quality of the actual product. You can get all hung up on specs such as U-Value, R-Value, Air infiltration, etc. But, I believe you can actually get more confused if you start trying to compare all of those numbers. Just ask if the product is an energy star rated window. If the answer is yes, then you know the specs meet the highest government standards. You can confirm this by going to the Energy star website.If the manufacturer is listed on the energy star site, you can be sure that the U-Value, R-Value, SHGC, and Air infiltration tests have met the requirements. So, now you can concentrate on some of the functional parts of your window. If you are in the market for a single hung or double hung window, ask about the mechanism that is used to hold up your window sashes. If they still use the old spring and string method (sometimes referred to as block and tackle), or the spiral metal balances, you are not getting a high quality window. The constant force balance system is more technologically advanced. It uses a titanium coil that is designed to last longer than you or I. Also, a good quality hung window will have sashes that can tilt in so you can clean the glass from inside the home. This is a nice feature to have, especially if your windows are on the second floor. Just these two items can tell you a lot about the quality of the window. On horizontal sliders, look at the weep holes located on the lower fron of the window. There will be one on each end. These holes are there to drain out any water that might get inside. On many windows, the weep hole is just a punched hole that leads to the inside track. Unfortunately, with this type of situation, a strong wind can blow cold air and dirt through those holes, right into the home. A better quality window will have a one-way trap door on the weep holes. The door stays closed against wind and dust, but if any water gets into the inside track, the door will open to allow the water to escape. Also, check the frame corners. A quality window has welded corners. The vinyl corners are welded through a heat and cool process. A lesser grade window will use screws to hold the corners together. When you make your appointment for the estimate, be sure to request a sample of the window be brought to your home so you can visually check these things.
A salesman is taught to focus on their product’s strong points and avoid the weak points, so it’s up to you to stay focused yourself, and don’t allow yourself to be distracted. “How long has the manufacturer been in business?” “What is their warranty?” “Are the windows Energy Star rated?” “Are the installers licensed and insured?” “What mechanism holds up the sashes on the hung windows?” “Do they tilt in?” “Are the frames welded or screwed together?” “Do the horizontal sliders have weep hole covers?” If you get satisfactory answers to these questions, you are on your way to a positive vinyl window experience.

John Rocco has been installing
replacement windows since 1978.
To learn more, visit How To Install Windows

About the Author

John Rocco has been installing
replacement windows since 1978.
To learn more, visit How To Install Windows


Powered by WP Robot